Mix dish soap with water in a bucket and apply it to your cart using a rag or sponge. Clean out the inside of your cart as well, removing any belongings or trash, so your cart looks like new once you’re finished.
Make a note or take pictures of where each removable piece goes so you know where to reattach them later.
Use soft-edged foam tape to avoid damaging your cart.
Consult a sandpaper size chart to find fine-grit sandpaper. 120 to 400 grits is ideal. [3] X Research source After you’ve finished sanding, use a microfiber cloth to brush off any sanding dust.
Use a paint primer made specifically for plastic surfaces. If your golf cart is a darker color, apply two coats of primer. Wait twenty to thirty minutes before applying the second coat.
Start with one standard can of spray paint and purchase additional cans as needed. Make a note of where you purchased your first can so you know where to find the right color.
Spray in short spurts instead of a constant stream for a more focused coat. In most cases, you will need to apply at least two to three coats.
One coat is necessary, but two coats can create an optional protective layer. Wait thirty minutes in-between applying coats.
Reattach any parts you removed before painting after the cart has dried. Check the weather report for the next day to make sure your cart will not receive wind or rain exposure. If the weather looks stormy, paint your cart in the garage with the doors open.
If you begin having breathing troubles or experience nausea, remove yourself from the area to a well-ventilated place. Call Poison Control for further instructions. If you are painting in your garage, make sure to open the door to avoid fume inhalation.
Choose canvas over plastic drop cloths, as cloth is less slippery and stays more secure on the floor. [10] X Research source
Scrub the paint off with soap and warm water immediately if you get paint on your hands.
